Assigning IP addresses 

  • Log in to the WBM. 

Return to topicHow do I get to the WBM again? Click here for more information... 

Establishing a connection to the Web-based Management (WBM):

  • Open a web browser on your computer.
  • In the address field, enter the URL https://<IP-address-of-the-controller>/wbm,
    for example: https://192.168.1.10/wbm.

For further information, see WBM.

 

  • Open the Network page (Configuration → Network). 
Network configuration in the WBM

 

The information under TCP/IP (LAN1) - Switched Mode refers to the subordinate network, i.e. the extension module. The information under TCP/IP (EXT LAN 1) refers to the higher-level network, i.e. the PLCnext Control.

 

  • Assign IP addresses and Subnet Masks for both networks appropriate for your security context (see topic Deriving IP addresses) by entering them in the Configuration area. 

  • Click the Apply and reboot button.

 

 

•  Web browser recommendation: Chrome/Edge 88 or newer, Firefox ESR 90 or newer, or Safari  • 
• Published/reviewed: 2023-11-02 • Revision 011 •