Checking the device (combined safety)

  • Log in to the WBM. 

    Return to topicHow do I get to the WBM again? Click here for more information... 

    Establishing a connection to the Web-based Management (WBM):

    • Open a web browser on your computer.
    • In the address field, enter the URL https://<IP-address-of-the-controller>/wbm,
      for example: https://192.168.1.10/wbm.

    For further information, see WBM.

  • Open the General Data page (DeviceGeneral Data). 
  • Check whether you are working on the correct device:
    • PLCnext Control RFC 4072S , Order No. 1051328
    • Serial No. as printed on the device
    • Firmware Version min. 2022 LTS
    • Hardware Version min. 02

 

 


• Published/reviewed: 2025-06-27 • Revision 018 •